Direct Replacement Seals For Common O.E.M Pumps
Welcome to Vulcan's Unique Seal Identification (ID) Suite providing you, the user, a view of our complete range of seals, with the capability to identify seals and their characteristics as well as conversions from our competitor product codes.
Direct Replacement Seals For Common O.E.M Pumps
 |
 |
22mm Single-spring O-Ring mounted semi-cartridge seals with push-fit heads to suit Grundfos ® CR & CRI series centrifugal pumps. The Vulcan Type 954 features inserted carbide faces driven by O-Rings, removing the posibility of face cracking during pump start-up, and improving the life expectancy of these seals. |
 |
 |
Vulcan produce and stock a complete range of balanced seals to suit the Tuchenhagen® A and Z series pumos, seal types F1 to F5. Available with inserted carbon face seal heads, and inserted silicon carbide, or chrome dioxide coated stainless steel rotary counterfaces. E.P. O-Rings are fitted as standard. If Nitrile or Viton® is required, please specify this at time of order. |
 |
 |
Conical spring O-Ring mounted seal with monolithic head and boot mounted seat, dimensions to specifically suit Fulwood Packo® milk equipment |
 |
 |
O-Ring mounted wave-spring seal head with key drive and Oring seat, to dimensions to specificaly suit Waukesha® votator equipment. |
 |
 |
Conical spring O-Ring mounted balanced seal for stepped shafts, dimensions to specifically suit K.S.B ® movi series pumps. |
 |
 |
Single spring O-Ring mounted seal with protective coil sheath and monolithic seal driven by O-Ring recessed in shaft. Specifically to suit A.B.S ®. Pumpex® sp series pumps. |
 |
 |
n balanced seals pack |
 |
 |
Multiple-spring, non-clogging, balanced mechanical seal with key drive from shaft. Designed to replace metal bellows 680 type seals in grasso® reciprocating compressors. |
 |
 |
The Vulcan Type 41 is a unitised, highly robust, balanced multispring design seal, to provide an alternative lower seal. With the springs protected from the media, to prevent seal damage and clogging, that often leads to premature seal failure. |
 |
 |
The Vulcan Types 40S and 42 are O-Ring mounted, hydraulically-balanced multi-spring seals to replace the upper and lower seals found in more recent designs of Sarlin pumps. |
 |
 |
Repair kits comprising monolithic rotary and stationary faces with necessary o-rings, to suit A.P.V® dw-series pumps. |
 |
 |
Vulcan also offer a complete 53mm shaft seal to suit Imperial Machine Company® waste-disposal units, model numbers 1204 and 1604. Seals have stainless steel rotary faces vs. Carbon seats, with Viton® elastomers. |
 |
 |
Vulcan also offer a complete 53mm shaft to suit Imperial Machine Company® waste-disposal units, model numbers 1204 and 1604. Seals have stainless steel rotary faces vs. Carbon seats, with Viton® elastomers. |
 |
 |
Reverse-tapered spring elastomer diaphragm rotary units with very short working length to suit dimensions required by aircraft refueling pumps. |
 |
 |
Vulcan manufacture and stock the type 277 and 278 diaphragm bellows seal ranges to suit the unique dimensions required in the CG-series range of pumps. The Type 277 has reverse-tapered coils, while the Type 278 has distinctive lengthened parallel coils. |
 |
 |
Single spring L-gasket seal with pin-driven carbon rotary face , and end-plate type stainless steel seat with PTFE gasket, to directly suit A.P.V®. Pasilac® 51-series milk pumps |
 |
 |
Double-ended rubber diaphragm seal with single spring and boot mounted seats as standard. Dimensions to suit various Japanese pumps including Ebara® and Tsurumi®. |
 |
 |
Resilient elastomer diaphragm seal with modified base plate, and monolithic carbide seat, dimensions to directly suit Gorman-Rupp® T-series waste water pumps.. |
 |
 |
Vulcan produce a range of elastomer bellows seals to replace the SU range of KSB® seals. Available to order with carbon or silicon carbide rotary faces with silicon carbide seats, in the three standard elastomers. |
 |
 |
Robust rubber bellows seals with extended working lengths, spacers and O-Ring mounted seats, dimensions to specifically suit Grundfos ®® cp-series pumps. |
 |
 |
Robust rubber bellows seal with large diameter O-Ring mounted seat ans star clip, dimensions to specifically suit A.B.S ® jumbo and pumpex® sp series submersible pumps. |
 |
 |
The Vulcan Type 194 is a robust elastomer bellows seal to replace the G- seals found in Hidrostal pumps. Available with silicon carbide rotary faces and silicon carbide boot seats. Size codes marked with ＊ are supplied complete with the necessary back washer to separate the bellows from shaft circlip. |
 |
 |
Vulcan produce and stock a range of elastomer bellows seals to suit the most common types of standard KSB® pumps. Available from stock with carbon or silicon carbide rotary faces with silicon carbide seats, in the three standard elastomers. |
 |
 |
Vulcan manufacture and stock an elastomer bellows seal that is designed to replace the Grundfos ® seal styles A-, B- & C- with a single superior performing and easier to install seal design. Available from stock in carbon vs. Tungsten carbide, or tungsten carbide vs. Tungsten carbide, in E.P. or Viton ® elastomers. |
 |
 |
Parallel spring O-Ring mounted seals with steel rotary head and set-screw drive base. Dimensions to specifically suit varley® vacuum pumps. |
 |
 |
High performance rubber bellows seal with protected non-clogging spring, and special dimension seat ring with O-Ring to mount into housing groove. Dimensions to suit Godwin®HL-series pumps. |
 |
 |
Wave-spring O-Ring mounted mechanical seal with set-screw drive and multiple retainer spacers to provide exceptionally long working length. Dimensions to suit Blentech® rotary cookers. |
 |
 |
Wave-spring O-Ring mounted mechanical seal without barrel, to locate directly onto the shaft step and provide exceptional short working length. Dimensions to suit GEA Tuchenhagen® KN series pumps. |
 |
 |
Vulcan have designed a special Type 1689 seal to suit the ACE025, ACE032 and ACE038 generation three pumps fitted with the three-part seals. |
 |
 |
Wave-spring O-Ring mounted mechanical seal with set-screw drive and short working length and bi-elastomer stationaries. Dimensions to suit Johnson® TL series pumps. |
 |
 |
Vulcan seals to suit Johnson® Positive Displacement Pumps Vulcan Type 1688Y seal and seat suit Johnson® positive displacement pumps, in all standard shaft sizes. Again the monolithic seal head provides seal capability, performance and increased life benefits. |
 |
 |
Vulcan manufacture seals to suit SR Series Pumps from S.S.P.® Vulcan Type 1688W seal and seat assemblies are designed to fit the most popular rotary lobe pumps, without any modification. The monolithic Tungsten Carbide or Stainless Steel seal head avoids face spinning problems, associated with competitor designs in common lobe pump duties. |
 |
 |
Wave-spring, O-Ring mounted stationary seals, with inserted tungsten carbide un-sprung rotary face, and inserted carbon stationary face. Dimensions to suit Warman® high-pressure rotary pumps. |
 |
 |
Wave-spring, step-balanced, barrel-less seals with distinctive flat-sided O-Ring mounted carbon seats. Dimensions to suit Alfa Laval® SR and LKPL pump ranges. |
 |
 |
Robust, balanced, hygienic seals with the multiple springs protected from the media, and clamped drive from the shaft. Dimensions to specifically suit Fristam ® FM-series multi-stage pumps. |
 |
 |
Robust, balanced, hygienic seals with the multiple springs protected from the media, and clamped drive from the shaft. Dimensions to specifically suit Grudfos Hilge® pumps. |
 |
 |
Robust, balanced, hygienic seals with the multiple springs protected from the media, and clamped drive from the shaft. Dimensions to specifically suit Grudfos Hilge® pumps. |
 |
 |
Robust, balanced, hygienic seals with the multiple springs protected from the media, and clamped drive from the shaft. Dimensions to specifically suit Grudfos Hilge® pumps. |
 |
 |
Robust, balanced, hygienic seals with the multiple springs protected from the media, and clamped drive from the shaft. Dimensions to specifically suit Fristam® FPE 1230 pumps. |
 |
 |
Robust, balanced, hygienic seals with the multiple springs protected from the media, and clamped drive from the shaft. Dimensions to specifically suit GEA Tuchenhagen® KN-series pumps. |
 |
 |
Robust, multiple-spring, O-Ring mounted seals with short working length and set-screw drive. Supplied with gasket-mounted clamped seats as standard. |
 |
 |
Repair kits comprising monolithic carbon rotary face with O-Ring, stainless steel static face with elastomer boot and wave spring. Dimensions to suit I.T.T. Jabsco® Hy-Line series pumps. |
 |
 |
Repair kits comprising monolithic carbon rotary face with O-Ring, stainless steel static face with elastomer boot and wave spring. Dimensions to suit I.T.T. Jabsco® Hy-Line series pumps. |
 |
 |
Available in either repair kit form, or as a complete mechanical seal assembly, fitted within the stainless steel outer collet. The Vulcan Type 1640 is a direct replacement for the E.B.S. Seal fitted to the most common EMU Pumps. Repair kits comprise of all wear parts being; two stationaries with O-Rings, central rotary with elastomer diaphragm, anti-rotation pins and springs for stationaries and retaining pins for the collets. |
 |
 |
Vulcan produce a range or O-Ring mounted wave-spring seals to replace the upper seals found in common A.B.S ® submersible pumps. Common sizes available from stock with stainless steel rotary faces with carbon seats, in the same style as the OEM seals. |
 |
 |
Robust multi-spring O-Ring mounted seal with set-screw drive and bi-elastomeric stationary. Design suited for many applications, especial mixers and agitators. |
 |
 |
Robust, multiple-spring, O-Ring mounted seals with set-screw drive and O-Ring mounted seats, dimensions to specifically suit Haig Company® macerator pumps. |
 |
 |
The Vulcan Type 1615 is an O Ring mounted multi-spring seal to replace the upper seals found in older models of Sarlin® pumps. Available from stock with stainless steel rotary faces vs. antimony carbon seats, with Viton® O-Rings |
 |
 |
Sinusoidal-spring elastomer diaphragm seals with very short working length, dimensions to suit upper seal chamber in certain A.B.S ® AF-series submersible pumps. |
 |
 |
Thin profile rubber bellows seal with special O-Ring mounted seat with O-Ring mounted in groove in pump housing. Dimensions to specifically suit kolmeks® at-series pumps. |
 |
 |
Robust conical spring O-Ring mounted seals with machined steel retainer and O-Ring mounted face. Dimensions to DIN L1K standards. |
 |
 |
Conical spring O-Ring mounted seals with pressed steel retainer and O-Ring mounted face. Dimensions to specifically suit mono® cms series pumps. |
 |
 |
Conical spring O-Ring mounted seals with pressed steel retainer and O-Ring mounted face. Dimensions to specifically suit Calpeda® mpc series pumps. |
 |
 |
Vulcan also produce and stock Type 131 seals to suit Lowara ® CEA/A, BG/A, CO/A and HM/A pumps fitted with the new SM motor. They are modified Type 13 tapered right-hand spring seals, with Silicon or Tungsten Carbide faces vs. Silicon or Tungsten Carbide stationaries supplied with the usual choice of O-Rings. |
 |
 |
Conical spring O-Ring mounted seals with pressed steel retainer and O-Ring mounted face. Dimensions to DIN L1K standards. |
 |
 |
Conical spring O-Ring mounted seals with pressed steel retainer and O-Ring mounted face. Dimensions to DIN L1K standards. |
 |
 |
Vulcan produce and stock a modified 38mm Type 12 seal to suit the reduced housing size found on Sihi® pumps. Available from stock in the usual face and elastomer combinations for Type 12. |
 |
 |
The Vulcan range of Type 06 seals are designed as superior replacement seals for Flygt® and Grindex® submersible pumps and mixers, with no pump modifications necessary. The Type 06 designs require no additional fitting tool and most types have pre-set working lengths, operated by removable setting clips for easy installation. |
 |
 |
Unitised multi-spring double seals with dimensions to suit ITT Flygt® pumps. Design and material improvements such as all-steel retainer parts and improved spring location provide performance advantages. |
 |
 |
Robust short working length single spring seal with dimensions to suit Blackmer® XLW-series pumps. Design and material improvements such as constantly energized o-ring and machined metal retainer provide performance advantages. |
